1-855-924-LIFT

Complete Systems

A complete repair includes addressing underlying concerns, lifting and leveling the concrete and protecting the area from future issues. These products can ensure that the area surrounding your slabs is in ideal condition upon completion. 

Voids below concrete slabs are often the cause of settlement. Before Precision Lift is used to lift the slabs, Precision Fillᵀᴹ is injected to fill these voids. This two-component, low exotherm, polyurethane foam has a low viscosity, which allows for moderate permeation effects as well.

Voids below concrete slabs are often the cause of settlement. Before Precision Lift is used to lift the slabs, Precision Fillᵀᴹ  is injected to fill these voids.  This two-component, low exotherm, polyurethane foam has a low viscosity, which allows for moderate permeation effects as well.

Precision Fillᵀᴹ advantages:

• • Highly expansive
• • High strength
• • Low exotherm (will not self ignite)
• • Bonds with soil and to concrete
• • Provides a slow, steady reaction

Once voids are filled and the slabs have been lifted back even, how can we protect the slabs? Precision Sealᵀᴹ is a self-leveling sealant designed to offer superior adhesion to concrete. It is ideal for sealing cracks and horizontal joints in driveways, patios, porches and sidewalks.

Precision Sealᵀᴹ advantages:

• • Excellent adhesion on porous and non-porous substrates
• • High performance mechanical properties
• • Permanently elastic after full cure
• • Self-levelling
• • Color stable and UV resistant
• • Ecological advantages:
    free of isocyanates, solvents, halogens and acids
• • Good extrudability - even at low temperatures
• • Excellent weather resistance in all climates
• • Primerless adhesion on many substrates (except where water pressure may occur).
• • Almost odorless
• • No bubble formation within sealant even in high temperatures & humidity 
• • Can be painted with water based paints and many other systems (to be tested)

Prime Cem Renew is a polymer modified, fiber-reinforced concrete resurfacing mortar. Adding only water, it provides a fresh, aesthetically pleasing appearance to new concrete that has been marred by rain or plastic covering, old or spalled concrete, and salt damaged concrete.

Primary Applications
• Driveways
• Sidewalks
• Pool decks
• Garage floors
• Elevated slabs
• Vertical concrete surfaces

Advantages
• Excellent working time at 70°F (21°C)
• Polymer modified
• Micro-fiber reinforced
• Suitable for freeze-thaw environments
• Open to foot traffic in 4 hours, rubber tire traffic in 12 hours at 75°F (24°C)

Prime Protect SWR is a ready-to-use, water-based siloxane/silane penetrating water repellent sealer. It soaks into the substrate and forms a water and chloride barrier that protects concrete and masonry from the damaging effects of water and salts, especially in freeze-thaw climates and marine environments. Prime Protect SWR is a breathable sealer that does not alter the appearance or texture of the substrate.

Primary Applications
• Sidewalks
• Ramps
• Walls
• Industrial floors
• Parking decks

Advantages
• Low VOC content
• Breathable
• Non film-forming; leaves no gloss or shine
• Can contribute to LEED points